Midea DSK45U5 Instant Water Heater

Key Features and Specifications

  • Brand: Midea
  • Model: DSK45U5
  • Product Type: Instant electric water heater
  • Rated Power: 4500W
  • Rated Voltage: 220–240V
  • Rated Frequency: 50/60Hz
  • Minimum Flow Rate: 1.2 litres per minute
  • Pump: No built-in pump
  • Control Type: Mechanical, stepless temperature control
  • Colour: White
  • Safety Features: Built-in Earth Leakage Circuit Breaker (ELCB), automatic flow sensor and thermal cut-out
  • Overheating Protection: Automatic cut-off when water temperature exceeds 55°C
  • Waterproof Rating: IP25
  • Operating Water Pressure: 0.03–0.3MPa
  • Dimensions (W × D × H): 232 × 103 × 406mm
  • Net Weight: 1.84kg
  • Shower Set: Not included
SKU: DSK45U5

Special Prices for Our Special Customers

Get discounts on selected devices today

KSh 16,995.00

19 People watching this product now!
  • Pick up from the Housewife's Paradise Store

To pick up directly from our store

  • Courier delivery

Our courier will deliver to the specified address

Standard Charges Apply

Description

Midea DSK45U5 Instant Water Heater in Kenya

The Midea DSK45U5 instant water heater in Kenya provides hot water on demand for everyday bathing and washing needs. With a 4500W heating element, a minimum flow rate of 1.2 litres per minute and mechanical temperature control, this heater offers a practical solution for homes that need convenient water heating without a storage tank. Additionally, its compact design helps save installation space.

4500W Power for Instant Water Heating

The Midea DSK45U5 uses a 4500W heating system to heat water as it flows through the appliance. Unlike a storage water heater, it does not need to maintain a large tank of hot water before use.

As a result, the heater provides hot water on demand when the water supply and operating conditions meet its requirements. Furthermore, its 220–240V electrical rating suits compatible electrical installations.

Actual water temperature depends on the incoming water temperature and flow rate. Therefore, reducing the flow may increase the outlet temperature, while a higher flow may produce cooler water.

Mechanical Control for Adjustable Temperature

The Midea DSK45U5 features mechanical, stepless control that lets you adjust the heating level according to your preference. This simple control arrangement makes it convenient to change the temperature setting during normal operation.

Additionally, you can adjust the setting to suit different water conditions and bathing preferences. However, always check the water temperature before use to avoid scalding.

Minimum Flow Rate of 1.2 Litres per Minute

This Midea instant water heater has a minimum operating flow rate of 1.2 litres per minute. Its built-in flow sensor monitors water movement and switches off the heating system when the flow falls below the specified threshold.

Consequently, the flow sensor helps protect the appliance during low-flow conditions. The heater also operates within a specified inlet pressure range of 0.03–0.3MPa.

Important: This model does not have a built-in pump. Your water supply must provide sufficient pressure and flow for the heater to operate correctly.

Built-In Safety Protection

The Midea DSK45U5 includes several safety features designed to support safer operation. Its built-in Earth Leakage Circuit Breaker (ELCB) helps disconnect the electrical supply when it detects current leakage.

Furthermore, the automatic thermal cut-out switches off the heater if the water temperature exceeds 55°C. The flow sensor also helps prevent continued heating when water flow becomes too low.

The appliance has an IP25 water-protection rating. Nevertheless, correct installation remains essential. Have a qualified electrician install the heater with the required earthing and suitable circuit protection, following the manufacturer’s instructions and applicable Kenyan electrical requirements.

Compact Design for Bathrooms

The Midea DSK45U5 measures approximately 232 × 103 × 406mm. Its compact dimensions make it suitable for installations where wall space is limited.

Additionally, its white finish provides a simple appearance that fits different bathroom styles. The unit weighs approximately 1.84kg, making it relatively lightweight for its intended wall-mounted installation.

Please note that the product is supplied without a shower set. Check the required fittings and installation accessories before purchasing.

Midea DSK45U5 Instant Water Heater Specifications

Feature Specification
Brand Midea
Model DSK45U5
Product Type Instant electric water heater
Rated Power 4500W
Rated Voltage 220–240V
Rated Frequency 50/60Hz
Minimum Flow Rate 1.2L/min
Built-In Pump No
Control Type Mechanical, stepless control
Minimum Water Pressure 0.03MPa
Maximum Water Pressure 0.3MPa
Rated Current 20.4A
Safety Features Built-in ELCB, automatic flow sensor and thermal cut-out
Overheating Protection Automatic cut-off above 55°C
Waterproof Rating IP25
Colour White
Product Dimensions (W × D × H) 232 × 103 × 406mm
Net Weight 1.84kg
Shower Set Not included
Warranty 12 months, according to Midea’s Kenya listing

Why Choose Midea DSK45U5 Instant Water Heater in Kenya?

The Midea DSK45U5 instant water heater in Kenya is worth considering if you want an on-demand water heating solution with straightforward mechanical controls. Its 4500W heating system, 1.2L/min minimum flow rate and compact design support everyday hot-water needs without requiring a storage tank.

Moreover, the built-in ELCB, flow sensor and thermal cut-out provide important safety functions. Since the unit has no built-in pump and requires a suitable electrical installation, confirm your water pressure and electrical supply before purchase. With the correct setup, this Midea heater offers a practical option for convenient hot-water access.